GView

Click Post-Processing in the PELOPS control window, click GView. Load the simulated scenario and select the data which you wish to have shown. You can choose between one diagram per vehicle, or you can have the data for a number of vehicles shown in one diagram. You can also view the data for a synthetic vehicle and a real vehicle in one diagram by selecting both vehicles from the vehicle list. Only those values which are available for both vehicles can be selected e.g. emission data is not available for a synthetic vehicle.

Select under 'menu/file' the desired and calculated scenario.

To enlarge the picture please click.

If you like to represent for example consumption and emission as a diagram e.g. in addition with time and way, you select the following parameters as follows

• Select a vehicle from the list.
• Mark the time from the list for the x-axis and the total consumption from the list for the y-axis.
• Click the button 'add'.

To enlarge the picture please click.

Note: You can only view data which are activated. See also output real vehicle/ output synthetic vehicle.